Not only do you get a beautiful bowl of colored, fast melting ice; but you can experience iridescence if you use the right pigment. I’m not going to tell you which pigment causes this effect. You’ll have to try all of them to see for yourself. Of course, you can kind of tell in the pictures below, but try it and see if you are right.

you need:
ice
table salt
primary food colors
neon food colors- if you can only get one pack, get the neon
*I HIGHLY suggest using both types of food coloring, it’s the best way to discover the pigment that causes the iridescence

to do:
1. fill a bowl with ice
2. sprinkle (or pour, try different amounts) table salt onto the ice
3. add drops of food coloring onto the salt
4. you get instant results with some of the colors, no results with some, and have to be a little patient with one color

 Here are some great links to explain what exactly is going on in this experiment and ways to understand what causes color:
1. SciScape 
2. Causes of Color -LOVE this site! Explains color really well.

Don’t dump the ice when you are done, let the ice melt down and see what happens to the iridescence. Enjoy!

for the clay you need:
2 cups cornstarch
1 cup salt
2 cups baking powder
2 cups water
**this amount was made for 7 children (and three mamas too)

for sculpting and color:
watercolors
toothpicks

to make:
1. Add dry ingredients to the water and cook on medium to high heat, stirring constantly
2. The mixture will start getting clumpy, turn the down heat; when about 80% of the mixture is dough-like take off the heat and continue to stir until the leftover liquid joins the dough.
3. Let cool for a few minutes then start molding and sculpting.

The little ladies used toothpicks to make the legs and join pieces and parts. Then covered the toothpicks with the clay. You can dry the clay creations in the oven at 225 degrees for a few hours or let them air dry for a few days.

My favorite part of this clay is how watercolors absorb and spread on it. The best time to paint is after the creations are dry, but if your little ones (or yourself) are impatient you can paint after sculpting; however, it wets the dough quite a bit.  

Being the science lover I am, I cannot post this dough recipe without a link to learning about polymers. Cornstarch is one of the most enjoyable ingredients to understanding polymers. If you have ever made Oobleck, you know what I am speaking of! Kendra and Kathleen, I foresee a mad scientist day on Thursday involving lots of cornstarch and water…………

Simply laminate a pressed leaf, trim around the leaf, place the leaf backside-up and you’ve got yourself  a leaf rubbing plate. 

These plates work just as well as the ones you buy from the education stores! These are much cheaper and you can use any leaf from your yard or park.

Poke holes in the plates and add them to a book ring (love book rings) for safe keeping. Label the names of the leaves with a Sharpie to help learn leaf identification. They are so much prettier than those plastic plates!

Thank you everyone who has voted for me for the Best Unschooling Blog Award, please keep the votes coming!  If you haven’t voted yet- vote here.

They Might Be Giants came out with a new science CD/DVD collection called Here Comes Science They Might be Giants! TMBG has always been a favorite band of mine and I find my little ladies loving them as well!  Here’s a sneak peek video of  their PTOE song- “Meet the Elements:”

Not a TMBG song but it is a pretty song and video about the water cycle.

Fauna is fascinated with this one! She wants to be able to sing it word for word. Good Luck Fauna!

It’s a bar of Ivory soap after being cooked in the microwave for a couple of minutes! It’s a very cool experiment that you must try with your little ones! I developed a little booklet to guide this experiment. This is also a great experiment to do with the PTOE when discussing Oxygen.

For the experiment you need:

a bar of Ivory soap

downloadable booklet- cut pages in half then assemble and staple

large bowl of water

math cubes

newspaper or wax paper to protect table

 Our little friend Emma had all kinds of great questions about this experiment. She even wondered if the bar was hollow.

After completing most of the booklet, it’s time to put the soap into the microwave:

1. Put the soap in the center of a large plate.

2. Cook the bar of soap on HIGH for 2 minutes. DON”T take your eyes off the soap, it’s very cool to see it expand into fluffy clouds.

3. Let it cool before touching, it can be VERY HOT!

So why does Ivory blow up in the microwave??

All soap contains water; both in the form of water vapor (inside trapped air bubbles) and water that is caught up in the matrix of soap itself. The soap expanding is caused by the heating of the water that is inside of the soap. The water vaporizes, making bubbles, while the heat also causes trapped air to expand. The heat also causes the soap to soften and become pliable. This effect is actually a demonstration of Charles’ Law. When the soap is heated the molecules of air in the soap move faster causing them to move far away from each other. This causes the soap to puff up and expand to an enormous size. Charles’ Law states that as the temperature of the gas increases so does its volume. Try a non-whipped bar of soap and see if Charles’ Law effects it too.

A little history of Ivory soap:

The concept of soap that floats was rumored to have been encountered by accident. The story goes that Harley Procter named the soap ‘Ivory’ from a biblical verse (Psalm 45) church: “All thy garments smell of myrrh and aloes and cassia, out of the ivory palaces whereby they have made me glad.” In 1878, the formula for the “White Soap” was created. Several months later the accident occurred. Without thinking one of the workmen left to go to lunch and the machinery was still running. Since the machinery was left in operation, air would work its way into the mixture. The workman decided not to discard the mixture after discussing with his supervisor. Instead he poured mixture into frames and the soap hardened. Interestingly enough it was cut, packaged, and shipped. Amazingly, Procter & Gamble began to receive letters from buyers of this “accidental” soap. They wanted more of the soap that floats! Even though this interesting formula was one of their best products, they were perplexed as to how this happened. The mysterious formula for the floating soap was resolved when the lunchtime accident was revealed. The error the workman made became Procter & Gamble’s new product. Why was this product so popular? Some people were known to bathe in the Ohio River and the floating soap would never get lost. Ivory Soap became a best seller due to a workman’s error. Proctor & Gamble makes the floating soap by intentionally adding a small amount of air in the formula. Naturally, this allows the soap to be lighter than water (from essortment.com).

What to do with the soap bits:

 1. After the experiment it’s time to play with the soap- Ivory soap sculptures!  Have a small bowl of water available to wet hands, this helps in the molding of the fluffy soap. If the soap is too dry it will not form well.

 Here are some of the lovely creations that the three little ladies made from the soap- a cave, a house,

and a little kitty!

2. Add pieces to warm water and do some felting with wool roving. We are planning on making cocoons tomorrow!

3. Make a new bar of soap- melt the soap in a pan, add a bit of water, add oatmeal and lavender buds. Pour into a mold.

4. Make soap balls (the little ladies love these)-  put the soap bits in a bowl, add a touch of water,  add lavender or other dried flowers, and roll the mixture into a ball. Place on waxed paper to dry overnight.

What a great activity to do during flu season! I guarantee clean hands in the end! Enjoy!